Low Profile Car Service Ramp

• After-sales Service: None
• Warranty: None
• Load Capacity: 3t
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GT13P
• Lifting Height: 70mm
• Foldable: Not Foldable
• Material: PP
• Certification: CE
• N.W: 3.4kg/Set
• Transport Package: in Carton
• Specification: 71*21*12cm
• Trademark: wokercare
• Origin: China
• HS Code: 3926909090
• Production Capacity: 10000pairs

Product Description

 Low Profile Car Service Ramp 2 PCS Set

Material	Plastic
Color	Black
Item Weight	7 Pounds
Load Capacity	6600 Pounds
Product Dimensions	27.4"L x 7.9"W x 3"H
Manufacturer	Workercare
Model	Car Ramp
Item Weight	7 pounds
Product Dimensions	27.4 x 7.9 x 3 inches

Product Feature

[8.6° Loading Angle]

Make these car service ramps easier and safer to load low-profile cars without touching the front bumper.

[6600LBS Load Capacity]

New PP material makes the car service ramp lightweight (3.5 LBS/each) but high-strength, load capacity up to 3 Ton (6600 lbs/pair).

[2.5" Lifting Height]

Lifting low-profile cars for 2.5 inches higher, make sure you can put the hydraulic floor jack under the lowered chassis cars.

Notice

This low-profile car ramp is designed to help lowered chassis cars lift up, then you can put the hydraulic floor jack under the cars. If you want to change oil directly by only using the car service ramp, we recommend you choose the regular height car service ramps.

How to make sure your lowered car can drive up without touching the front bumper.

(H) = Front ride height, The distance between the ground to the front bumper.

(L) = Front ride length, The distance between the front-wheel ground touchpoint to the front-bumper head end.

a. H > 78 mm, No problem.

b. 68mm < H < 78 mm, and L < 590 mm, No problem.

c. 68mm < H < 78 mm, and L > 590 mm, You may not drive up without touching the front bumper.

d. H < 68 mm, Then you need to do this (For example, H = 60mm):

1. Calculate the requirement of the front ride length: L = H/tan0( 8.6 ) = 60mm/0.15 ≈ 400 mm.

2. Measure the real front ride length L.

If L < 400mm, No problem.

If L > 400mm, You may not drive up without touching the front bumper.

General Using Method